Epoxy Flooring in Kersey, PA
Concrete is porous, which is the single fact that explains almost every disappointing garage floor in Pennsylvania. Oil soaks in rather than sitting on top, road salt carried off tires works down into the slab and stays there, and moisture moves through from below whenever the ground outside is wetter than the air inside. Choosing professional epoxy flooring in Kersey, PA is a decision to close that surface off permanently, and the coating is only the visible half of what makes that work.
Winters here make the case sharper than they would almost anywhere milder. Salt and brine come off vehicles for months at a stretch, freeze-thaw cycling works at any crack already present in a slab, and an unheated garage swings through temperature ranges that ordinary concrete paint simply cannot tolerate without lifting. Application timing matters as much as product selection, because resin cures on a schedule governed by temperature rather than by the calendar, and a coating applied into a cold slab never develops the hardness it was rated for. Durable garage floor coatings in Kersey, PA therefore have to be selected and applied with those conditions in mind, since a product that performs perfectly in a conditioned space can fail in a single season out here.
As a family-owned company with over 8 years of experience, Pa Epoxy Works delivers experienced epoxy flooring in Kersey, PA, across garage, commercial, and workshop floors; decorative and specialty coatings; epoxy repair and restoration; luxury vinyl plank; hardwood refinishing; and interior and exterior painting. We are licensed and insured, BBB accredited with an A+ rating, and free estimates come standard on every project we quote.
About Kersey, PA
Elk County contains Kersey, an unincorporated community within Fox Township with 797 residents recorded in the 2020 census. Settlement began in 1810 under the name Centreville, at a point when the surrounding land was still part of Clearfield County rather than Elk, which is why the earliest records sit under a different jurisdiction entirely.
The community took its present name almost immediately. William Kersey built a grist mill and a sawmill here later that same year, and the settlement was renamed for him, a sequence that says a good deal about how quickly a working mill could come to define a place in Pennsylvania at that point in its history.
Lumber and coal drove the early economy, as they did across much of this part of the state. Little Toby Creek has its headwaters here, Pennsylvania Route 948 runs directly through the community as its main route, and the Eastern Continental Divide passes roughly one mile away to the southeast.
Grinding and Moisture Testing Before Epoxy Flooring in Kersey
Grind first, coat second, and never the reverse. Epoxy bonds mechanically rather than chemically, which means it grips into the open pores of a profiled surface, so a smooth, sealed, or previously coated slab has to be opened up with diamond grinding before anything is applied over it.
Moisture testing decides whether the whole project is viable as planned. Vapour moving upward through a slab will push a coating off from underneath regardless of how carefully the top was prepared, and a garage or basement sitting on grade needs that movement measured before a system gets specified rather than after a floor starts lifting.
Repair happens in the same phase. Cracks, spalling, and pitted areas get filled and levelled before coating, because epoxy follows the contour it is given faithfully and will reproduce every low spot and every crack that somebody decided to coat over instead of fixing properly. Correcting the slab first is not an upsell.
Our Services in Kersey, PA
Flake, Metallic, and Decorative Epoxy Flooring Systems in Kersey
WRAP RESINS, SurfKoat, Sherwin-Williams, Direct Colors, EPODEX, WiseBond, Liquid Rubber, Smith Paints, and Bona are all products we actually work with. Pa Epoxy Works has been an expert epoxy flooring company in Kersey, PA for over 8 years, and having a genuine range across product lines means the recommendation follows your slab rather than whichever bucket happens to be in the van.
Being family-owned keeps the standard consistent from one job to the next. A BBB accreditation with an A+ rating and membership in the local chamber of commerce both reflect a business that expects to still be answering its own phone here a long while from now.
Range beyond coatings makes a genuine difference on real projects. Luxury vinyl plank, hardwood refinishing, interior and exterior painting, and decorative wall finishes all sit right alongside the epoxy work, so a garage, a basement, and the rooms above them can be handled by one licensed and insured company.
Why Kersey Residents Trust Pa Epoxy Works?
WRAP RESINS, SurfKoat, Sherwin-Williams, Direct Colors, EPODEX, WiseBond, Liquid Rubber, Smith Paints, and Bona are all products we actually work with. Pa Epoxy Works has been an expert epoxy flooring company in Kersey, PA for over 8 years, and having a genuine range across product lines means the recommendation follows your slab rather than whichever bucket happens to be in the van.
Being family-owned keeps the standard consistent from one job to the next. A BBB accreditation with an A+ rating and membership in the local chamber of commerce both reflect a business that expects to still be answering its own phone here a long while from now.
Range beyond coatings makes a genuine difference on real projects. Luxury vinyl plank, hardwood refinishing, interior and exterior painting, and decorative wall finishes all sit right alongside the epoxy work, so a garage, a basement, and the rooms above them can be handled by one licensed and insured company.
What Our Customers Say
Hire Us! Dependable Epoxy Flooring in Kersey, PA
Free estimates are how every project here starts, and they are genuinely free of obligation. As a dependable epoxy flooring contractor in Kersey, PA, Pa Epoxy Works looks at the actual slab, checks its condition and its moisture behavior, and specifies a system built around what that concrete needs rather than around a standard package.
Preparation is included rather than treated as an upgrade. Diamond grinding, crack repair, and cleaning are part of doing the work correctly, and we explain exactly what your floor requires so the finish you pay for is one that will still be bonded in a decade.
We match color and finish to the space with you. Give us a call or send us a message about the garage, the workshop, the basement, or the commercial floor you have in mind, and we will come out and look at the slab. For garage and decorative epoxy flooring in Kersey, PA, that estimate is where it begins.
frequently asked questions
What is the difference between a flake system and a metallic finish?
Flake broadcasts vinyl chips into a base coat for a durable, slip-resistant surface that hides dirt well. Metallic suspends pigment in clear resin and gets worked while wet to create depth, which suits display spaces more than working garages.
How long before a coated floor can take vehicle traffic?
Foot traffic returns well before vehicles do, and full chemical cure takes longer than the surface suggests. We give you the specific timeline for the system installed, because driving on a floor early is how a good coating gets marked permanently.
Does road salt damage an epoxy garage floor?
Not the way it damages bare concrete. Salt and brine soak into an uncoated slab and work on it from inside, while a cured coating leaves them sitting on the surface where they can simply be mopped away.
Can epoxy go over an existing coating?
Sometimes, though it depends entirely on what is already there and how well it is bonded. A sound coating can often be abraded and recoated, while a failing one has to come off before anything new goes down.
What is a moisture test and when is one needed?
It measures vapour moving upward through a slab. Any floor on grade or below grade should be tested, because vapour pressure lifts a coating from underneath no matter how carefully the top surface was prepared beforehand.
Which product lines do you actually work with?
WRAP RESINS, SurfKoat, Epoxy Depot, EPODEX, WiseBond, PoxyTop, Liquid Rubber, and Direct Colors on the coating side, with Sherwin-Williams, Tonester Paints, Smith Paints, and Bona covering the painting and wood finishing work we take on.
What happens at the edges and along the wall base?
Edges get ground with hand equipment where the walk-behind machine cannot reach, and the coating can be carried up the wall as a cove base where a seamless, easily cleaned transition matters to how the space is used.
Can interior painting happen at the same time as a floor?
Yes, and sequencing it properly saves a return visit. Walls generally get finished before the final floor coats so nothing drips onto a curing surface, which is one advantage of a company that handles both trades.

